EasyManua.ls Logo

Huawei S6700 Series - Page 374

Huawei S6700 Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Data Preparation
To complete the configuration, you need the following data:
l IPv6 address of each interface on Switch A, Switch B, Switch C, and Switch D
l Area numbers of Switch A, Switch B, Switch C, and Switch D
l Levels of Switch A, Switch B, Switch C, and Switch D
Procedure
Step 1 Configure VLANs that interfaces belong to.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] vlan batch 10
[SwitchA] interface xgigabitethernet 0/0/1
[SwitchA-XGigabitEthernet0/0/1] port hybrid pvid vlan 10
[SwitchA-XGigabitEthernet0/0/1] port hybrid untagged vlan 10
[SwitchA-XGigabitEthernet0/0/1] quit
The configurations of SwitchB, SwitchC and SwitchD are similar to the configuration of
SwitchA, and are not mentioned here.
Step 2 Enable the capability of IPv6 forwarding, and configure IPv6 address for each interface. Take
the display on Switch A as an example. The configurations of Switch B, Switch C and Switch
D are similar to that of Switch A. The detailed configurations are not mentioned here.
<Quidway> system-view
[Quidway] sysname SwitchA
[SwitchA] ipv6
[SwitchA] interface vlanif 10
[SwitchA-Vlanif10] ipv6 enable
[SwitchA-Vlanif10] ipv6 address 10:1::2/64
Step 3 Configure IS-IS.
# Configure Switch A.
[SwitchA] isis 1
[SwitchA-isis-1] is-level level-1
[SwitchA-isis-1] network-entity 10.0000.0000.0001.00
[SwitchA-isis-1] ipv6 enable
[SwitchA-isis-1] quit
[SwitchA] interface vlanif 10
[SwitchA-Vlanif10] isis ipv6 enable 1
[SwitchA-Vlanif10] quit
# Configure Switch B.
[SwitchB] isis 1
[SwitchB-isis-1] is-level level-1
[SwitchB-isis-1] network-entity 10.0000.0000.0002.00
[SwitchB-isis-1] ipv6 enable
[SwitchB-isis-1] quit
[SwitchB] interface vlanif 20
[SwitchB-Vlanif20] isis ipv6 enable 1
[SwitchB-Vlanif20] quit
# Configure Switch C.
[SwitchC] isis 1
[SwitchC-isis-1] network-entity 10.0000.0000.0003.00
[SwitchC-isis-1] ipv6 enable
[SwitchC-isis-1] quit
[SwitchC] interface vlanif 10
[SwitchC-Vlanif10] isis ipv6 enable 1
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 6 IS-IS Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
355

Table of Contents

Other manuals for Huawei S6700 Series

Related product manuals