Huawei S6700 Series

l Configuration file of SwitchB
#
sysname SwitchB
#
vlan batch 10 30
#
interface Vlanif10
ip address 200.1.1.1 255.255.255.0
#
interface Vlanif30
ip address 9.1.1.1 255.255.255.0
#
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 10
#
interface XGigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 30
#
bgp 65009
router-id 2.2.2.2
peer 200.1.1.2 as-number 65008
peer 9.1.1.2 as-number 65009
#
ipv4-family unicast
undo synchronization
network 9.1.1.0 255.255.255.0
peer 200.1.1.2 enable
peer 200.1.1.2 route-policy 10 export
peer 9.1.1.2 enable
#
route-policy 10 permit node 10
apply cost 100
#
return
l Configuration file of SwitchC
#
sysname SwitchC
#
vlan batch 20 30
#
interface Vlanif10
ip address 200.1.2.1 255.255.255.0
#
interface Vlanif30
ip address 9.1.1.2 255.255.255.0
#
interface XGigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 20
#
interface XGigabitEthernet0/0/2
port link-type trunk
port trunk allow-pass vlan 30
#
bgp 65009
router-id 3.3.3.3
peer 9.1.1.1 as-number 65009
peer 200.1.2.2 as-number 65008
#
ipv4-family unicast
undo synchronization
network 9.1.1.0 255.255.255.0
peer 9.1.1.1 enable
peer 200.1.2.2 enable
#
return
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 7 BGP Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
463