Huawei S6700 Series - Page 569

[Switch C] bgp 200
[Switch C-bgp] router-id 3.3.3.3
[Switch C-bgp] peer 101::2 as-number 200
[Switch C-bgp] peer 102::2 as-number 200
[Switch C-bgp] ipv6-family unicast
[Switch C-bgp-af-ipv6] peer 101::2 enable
[Switch C-bgp-af-ipv6] peer 102::2 enable
[Switch C-bgp-af-ipv6] network 101:: 96
[Switch C-bgp-af-ipv6] network 102:: 96
# Configure Switch D.
[Switch D] bgp 200
[Switch D-bgp] router-id 4.4.4.4
[Switch D-bgp] peer 102::1 as-number 200
[Switch D-bgp] ipv6-family unicast
[Switch D-bgp-af-ipv6] peer 102::1 enable
Step 4 Configure the route reflector.
# Configure Switch C as the route reflector and Switch B and Switch D as the clients.
[Switch C-bgp] ipv6-family unicast
[Switch C-bgp-af-ipv6] peer 101::2 reflect-client
[Switch C-bgp-af-ipv6] peer 102::2 reflect-client
# View the routing table of Switch B.
[Switch B] display bgp ipv6 routing-table
BGP Local router ID is 2.2.2.2
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total Number of Routes: 6
*> Network : 1:: PrefixLen : 64
NextHop : 100::1 LocPrf :
MED : 0 PrefVal : 0
Label :
Path/Ogn : 100 i
*> Network : 100:: PrefixLen : 96
NextHop : :: LocPrf :
MED : 0 PrefVal : 0
Label :
Path/Ogn : ?
*> Network : 100::2 PrefixLen : 128
NextHop : :: LocPrf :
MED : 0 PrefVal : 0
Label :
Path/Ogn : ?
*> Network : 101:: PrefixLen : 96
NextHop : :: LocPrf :
MED : 0 PrefVal : 0
Label :
Path/Ogn : ?
NextHop : 101::1 LocPrf : 100
MED : 0 PrefVal : 0
Label :
Path/Ogn : ?
*> Network : 101::2 PrefixLen : 128
NextHop : :: LocPrf :
MED : 0 PrefVal : 0
Label :
Path/Ogn : ?
*>i Network : 102:: PrefixLen : 96
NextHop : 101::1 LocPrf : 100
MED : 0 PrefVal : 0
Label :
Path/Ogn : ?
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 8 BGP4+ Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
550