Huawei S6700 Series - Page 570

# View the routing table of Switch D.
[Switch D] display bgp ipv6 routing-table
BGP Local router ID is 4.4.4.4
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total Number of Routes: 4
*>i Network : 1:: PrefixLen : 64
NextHop : 100::1 LocPrf : 100
MED : 0 PrefVal : 0
Label :
Path/Ogn : 100 i
*>i Network : 100:: PrefixLen : 96
NextHop : 101::2 LocPrf : 100
MED : 0 PrefVal : 0
Label :
Path/Ogn : ?
*>i Network : 101:: PrefixLen : 96
NextHop : 102::1 LocPrf : 100
MED : 0 PrefVal : 0
Label :
Path/Ogn : ?
>i Network : 102:: PrefixLen : 96
NextHop : 102::1 LocPrf : 100
MED : 0 PrefVal : 0
Label :
Path/Ogn : i
The routing tables show that Switch D and Switch B have learned the routing information
advertised by Switch A from Switch C.
----End
Configuration Files
l Configuration file of Switch A
#
sysname Switch A
#
ipv6
#
vlan batch 10 20
#
interface Vlanif10
ipv6 enable
ipv6 address 1::1/64
#
interface Vlanif20
ipv6 enable
ipv6 address 100::1/96
#
interface XGigabitEthernet0/0/1
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface XGigabitEthernet0/0/2
port hybrid pvid vlan 20
port hybrid untagged vlan 20
#
bgp 100
router-id 1.1.1.1
peer 100::2 as-number 200
#
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 8 BGP4+ Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
551