Huawei SUN2000-150KTL-S0 - Page 45

PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
4 Installing Components
Issue 03 (2020-04-10)
Copyright © Huawei Technologies Co., Ltd.
39
Figure 4-7 Installing a smart ETH gateway
Step 2 Connect a ground cable to the smart ETH gateway.
1. Connect one end of the cable to the ground screw on the smart ETH gateway.
2. Connect the other end to the ground screw in the lower left corner of the cabinet.