Huawei SUN2000-150KTL-S0 - Wireless Networking

PowerCube 5000 (SUN2000-150KTL-S0)
Installation Guide
7 Installing Cables
Issue 03 (2020-04-10)
Copyright © Huawei Technologies Co., Ltd.
50
7.2.2 Wireless Networking
Procedure
Step 1 Insert the SIM card into the SIM card slot in the communications expansion board.
The SIM card inserted into the 4G communications expansion board (NIM01C3) should
support GSM, WCDMA, and FDD standards or GSM, TD-SCDMA, and TDD standards, and
have the PS (data service) function enabled.
Figure 7-4 SIM card slot
(1) SIM card slot
Step 2 Place the antenna outside the shelter.
Step 3 Connect the antenna to the ANT port on the NIM01C3.
Before installing the antenna, remove the plastic shell from the antenna installation base to
ensure magnetic adherence.
Figure 7-5 Installing a wireless antenna
----End