Huawei SUN2000-17KTL - Page 66

SUN2000 (8KTL-28KTL)
User Manual
5 Electrical Connections
Issue 12 (2019-06-30)
Copyright © Huawei Technologies Co., Ltd.
59

With an outer diameter of 4.5-7.5 mm (8 core wires, each with a diameter of 1.00-1.07
mm)
Step 2 Insert the shielded network cable through the sealing nut, seal ring, coupling nut, and plastic
housing.
Step 3 Line up the exposed wires of the network cable in sequence and connect them to the
corresponding pins on the plug, as shown in Figure 5-29.
Figure 5-28 Connection sequence
Figure 5-28 shows the connector side that does not have a clip. Table 5-3 lists the mapping
between the pins and wires.
Table 5-3 Mapping between pins and wires
Pin No.
Color
Function
1
White-orange
RS485A, RS485 differential
signal +
2
Orange
RS485B, RS485 differential signal
-
3
White-green
PGND
4
Blue
RS485A, RS485 differential
signal +
5
White-blue
RS485B, RS485 differential signal
-
6
Green
PGND
7
White-brown
PGND
8
Brown
PGND