Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The pictured pipe is for reference only. The actual pipe may differ.
Procedure
Step 1 Remove the locking nut and waterproofing bolt.
Step 2 Secure the pipe fitting to the enclosure using the nut provided with the pipe.
Step 3 Route cables through the conduit and then secure the conduit to the pipe fitting.
Step 4 Check that the cables are connected correctly and securely. Then take appropriate measures to
ensure that the pipe conduit and fitting are secured reliably, and seal the cable holes.
Figure 5-6 Installing a pipe for routing cables
To Next Page
Loading...
