b. Close the latch on the optical module to secure it. See (2) in Figure 5-18.
c. Insert the optical cable into the optical module. See (3) in Figure 5-18.
Figure 5-18 Connecting an optical cable
When you use an SFP+ cable:
1. Remove the old SFP+ cable.
Gently push the cable connector inwards and pull the latch out to remove the
SFP+ cable. See Figure 5-19.
Do not directly pull out the latch.
TaiShan 200 Server
User Guide (Model 2280) 5 Install and Congure
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 60
To Next Page
Loading...
