Huawei UAP2105 - Page 38

Parameter Input Value Description
Location Detect Mode Cell ID Location detection is
performed according to the
macro cell reported by the
AP. The location detection is
used to check the validity of
the AP.
PLMNID Location detection is
performed according to the
PLMN ID reported by the
AP.
IP Address Location detection is
performed according to the
IP address reported by the
AP.
None No location detection is
performed for the AP.
User Access Policy Close Only the UEs in the UE
permission list set in the
AHR can connect to the AP
network.
Open All UEs under the AP
coverage can connect to the
AP network.
PLMNID Display Information about the
operator that provides
services
When the PLMNID
Display switch is enabled on
the AP Manager and a UE
camps on the AP cell, the
information about the
operator is displayed on the
UE.
SMS Content
SMS content for location
indication
When the SMS Content
switch is enabled on the AP
Manager and a UE camps on
the AP cell, a message
containing the location
indication information is sent
to the UE.
Step 3 Type parameters (the parameters with red asterisks are mandatory), and then click OK. The AP
user is added successfully.
----End
5 Configuring the UAP2105
UAP2105
User Guide
5-8 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 03 (2009-08-20)