Huawei UAP2105 - Handling Alarms; Upgrading the Software; Table 6-2 Alarm Management Options

Step 4 Click Start to diagnose the faults.
After the fault diagnosis is complete, diagnosis results are displayed in the Trouble Diagnose
Log pane.
----End
6.3 Handling Alarms
This describes how to manage AP alarms on the AP Manager. You can subscribe to alarms,
query alarm logs, and query and monitor active alarms.
Procedure
Step 1 Log in to the AP Manager, and then click the Fault tab. On the tab page, manage alarms.
Table 6-2 describes alarm management options.
Table 6-2 Alarm management options
Alarm Management Option Description
Alarm Subscribe Subscribe to the alarms of an AP or maintain
the list of the APs that have subscribed to
alarms. Active Alarm Monitor, Active
Alarm Query, and Alarm Log Query are
available for only the APs that subscribe to
alarms.
Active Alarm Monitor View the active alarms that are not cleared in
real time and delete the cleared active alarms.
Active Alarm Query Query the active alarms reported to the AP
Manager database by the AP. To query the
detailed information about an alarm, click
on the left of the alarm.
Alarm Log Query Query the alarm logs reported to the AP
Manager database by the AP.
Terminal Alarm Log Query Query the remaining alarm logs on the AP. If
the AP is offline, the AP Manager prompts
operation timeout.
----End
6.4 Upgrading the Software
This describes how to upgrade the AP software on the FTP server.
UAP2105
User Guide 6 Routine Operation and Maintenance of the UAP2105
Issue 03 (2009-08-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-5