UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 2 Remove the cable covers for the power cables and signal cables from the cabinet, drill holes
into the cable cover, attach grommet strips to the hole edges for cable protection, and reinstall
the cable cover for the power cables, as shown in Figure 3-73.
Figure 3-73 Removing the cable cover from the top of the cabinet
The quantity of holes in the above figure is for reference only.
Step 3 Connect ground cables, as shown in Figure 3-74.
To Next Page
Loading...
