UPS5000-E-(50 kVA-300 kVA)
User Manual (50 kVA Power Modules)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Corresponds to signal of the input dry contact DI_1 on the MUE07A.
Corresponds to signal of the input dry contact DI_2 on the MUE07A.
Corresponds to signal of the input dry contact DI_3 on the MUE07A.
Corresponds to signal of the input dry contact DI_4 on the MUE07A.
Corresponds to signal of the input dry contact DI_5 on the MUE07A.
CIM Parameters
If iBAT is configured, set the parameters in this section by referring to the document delivered
with the iBAT.
Figure 4-55 shows the CIM Param. screen.
Figure 4-55 CIM parameters
On the System Info > Settings > CIM Param. > Basic Param. screen, if Number of battery strings is
0, the Batt. String Config is not displayed on the CIM Param. screen.
Figure 4-56 and Figure 4-57 show the Basic Param. screen.
To Next Page
Loading...
