14
Setting Network Access Parameters
You need to configure the WS319 to access the Internet.
1. Log in to the web management page.
2. Choose Home > Start Wizard. Select your Internet connection mode.
Refer to the following table to configure the network connection.
Scenario Connection Type
When you are unsure of the network connection you
subscribed to, you can select this mode that the device will
detect the network connection automatically.
Connect automatically
The account name and password are provided by your Internet
Service Provider (ISP).
Connect with user
account
No parameter is provided by your ISP. The IP address is
automatically assigned by the ISP.
Connect without user
account
To Next Page
Loading...
