Humminbird MEGA Live - Table of Contents

i
Introduction 1
Compatibility .............................................................................. 1
Supplies ................................................................................... 2
Update Software 3
Check the Current Software Version .................................................... 3
Update Control Head Software with an SD Card ....................................... 4
Update Accessory Software with an SD Card .......................................... 5
Update Software with FishSmart ........................................................ 6
Install the MEGA Live Imaging TargetLock 7
1. View the Installation Video ............................................................ 8
2. Prepare for Installation ................................................................ 8
3. Install the Mounting Plate ............................................................ 9
A. MEGA Live Mounting Plate ....................................................... 10
B.
MEGA Live Dual Mounting Plate (for use with MEGA 360) ....................... 11
4. Install the Control Box ................................................................ 12
5. Install the Landscape Mode Mount ................................................. 13
6. Test the MEGA Live Views ........................................................... 17
7. Connect the Shaft Assembly to the Mounting Plate .............................. 19
8. Install the MEGA Live TargetLock Heading Sensor ................................. 20
9. Adjust the Transducer Height ........................................................ 22
10. Reinstall the Motor Stabilizer....................................................... 23
Install the MEGA Live Imaging TargetLock Foot Pedal 24
Install a MEGA 360 (separate purchase) 26
1. Prepare for Installation ............................................................... 26
2. Assemble the MEGA 360 Mount .................................................... 27
3. Install the Pod ......................................................................... 29
4. Adjust the Pod Height ................................................................ 30
5. Install the Collar Clamp .............................................................. 32
Table of Contents