GENESIS OPERATIONS MANUAL
3
THE FLEXIBILITY YOU WANT ...
-
20 independent automatic Program
Starts that can run in series, parallel, or independently.
-
Manual and multiple simultaneous semi
-
auto programs.
-
Operate one to six individual stations manually with selectable Run Times, simultaneously or
sequentially.
-
Set Starts that cycle (re
peat) up to nine times or continuously
--
you specify the delay between
cycles. Allows water to infiltrate the soil between repeated applications. Useful for keeping
newly seeded areas moist, or for sloped areas.
-
Semi
-
automatically start portions of
your automatic Programs independently, by Program and Start.
-
Set controller to skip days for each Program.
-
For water management or seasonal adjustment, you can increase or decrease Run Times, for
each Start, from 1 to 512%.
-
Control the pump (or
master valve) output by Program.
THE DURABILITY YOU NEED ...
-
A 10
-
year lithium battery retains all time and Program settings during power failure or
interruption.
-
No more blown fuses caused by overloads. The fuse is protected by sensing circuit
ry that
shuts down valves during overload situations. It reports the failure with a message that
displays until you clear it.
-
Heavy duty input and output lightning protection (
see grounding requirements
).
-
Heavy
-
duty exterior grade, weather
-
resista
nt stainless steel or plastic cabinets.
EASY TO PROGRAM ...
-
You can set Run Times in either hours:minutes or minutes:seconds.
-
It's easy to set Run Times for large numbers of similar sprinklers
--
quickly, with a few keystrokes.
-
Each Program S
tart Time has its own independent Run Times.
-
You can set the day schedule length to water every day up to every 32 days, by Program.
-
Dial up of individual stations in large systems, without clicking buttons to advance.
-
Specify End times to preve
nt watering beyond certain limits.
-
Use Couple/MasterCouple to regulate water usage and prevent pressure drop.