Hunter Pro-C User Manual

Table of Contents
Introduction and Installation
3 Specications
4 Pro-C Components
8 Mounting the Controller to a Wall
9 Connecting AC Power
10 Connecting Station Wires
11 Connecting the Battery
12 Connecting a Master Valve
13 Connecting a Pump Start Relay
14 Connecting a Hunter "Clik" Weather Sensor
16 Connecting a Hunter Remote
18 Connecting to the Hunter Solar Sync
Programming the Controller
19 Setting the Current Date and Time
20 Setting Program Start Times
21 Setting Station Run Times
22 Setting a Watering Schedule
24 Options for Running Your Irrigation System
26 Using the Pro-C to Operate Outdoor Lighting
Advanced Features
28 Set Pump/Master Valve Operation
28 Programmable Rain O
28 Setting Specic Days O
Hidden Features
29 Program Customization
29 Programmable Delay Between Stations
30 Programmable Sensor Override
31 Total Run Time Calculator
31 Easy Retrieve
™
Program Memory
32 Solar Sync Delay
33 Cycle and Soak
35 Hunter Quick Check
35 Clearing Controller’s Memory/Resetting Controller
35 Winterizing Your Irrigation System
Troubleshooting Guide
36 Problems, Causes and Solutions
Quick Check and Easy Retrieve are trademarks of Hunter Industries Inc.
Pro-C, Solar Sync, Rain-Clik, Freeze-Clik and SmartPort are registered trademarks of
Hunter Industries Inc.

Hunter Pro-C Specifications

General

Start Times Per Program	4
Warranty	2 years
Cycle + Soak	Yes
Display	LCD
Housing Material	Plastic
Zones	6, 8, 12, 16 (depending on model)
Indoor/Outdoor	Indoor
Mounting	Wall-mount
Electrical Input	120V AC, 60Hz
Transformer Output	24V AC
Number of Stations	6, 8, 12, 16 (depending on model)
Wireless Capability	No