Hunter Pro-C User Manual

20
Setting Program Start Times
1. Turn the dial to the START TIMES position.
2. Press the n button to select A, B, or C.
3. Use the j and k buttons to change the start time
(advances in 15-minute increments). One start time will
activate all stations sequentially in that program. This
eliminates the need to enter a start time for each station.
4. Press the i button to add an additional start time,
or n button for the next program.
Eliminating a Program Start Time
With the dial set to the START TIMES position, push the j
and k buttons until you reach 12:00  (Midnight). From this
position push the k button once to reach the “OFF” position.
NOTE
All stations operate in numerical order. Only one program start
time is required to activate a watering program.
If a program has all four start times turned off, then that
program is off (all other program details are retained).
Because there are no start times, there will be no watering
with that program.

Hunter Pro-C Specifications

General

Start Times Per Program	4
Warranty	2 years
Cycle + Soak	Yes
Display	LCD
Housing Material	Plastic
Zones	6, 8, 12, 16 (depending on model)
Indoor/Outdoor	Indoor
Mounting	Wall-mount
Electrical Input	120V AC, 60Hz
Transformer Output	24V AC
Number of Stations	6, 8, 12, 16 (depending on model)
Wireless Capability	No