22
Setting a Watering Schedule
1. Turn the dial to the WATER DAYS position.
2. The display will show the last program selected (A, B,
or C). You can switch to another program by pressing the
n button.
3. The controller displays currently programmed active day
schedule information. You can choose to water on specific
days of the week, or you can choose interval watering, or
choose to water on odd days or even days. Each program can
operate using only one type of water day option.
Selecting Specic Days
of the Week to Water
1. Press the j button to activate
a particular day of the week
to water (the display always
starts with Monday). Press the
k button to cancel watering
for that day. After pressing a
button the display automati-
cally advances to the next day.
A
V
icon indicates a water day.
A
W
icon indicates a no water day.
2. After programming, set dial
to the RUN position to enable
automatic execution of
all selected programs and
start times.
Selecting Odd or Even Days to Water
This feature uses numbered day(s) of the month for watering
instead of specific days of the week (odd days: 1st, 3rd, 5th, etc.;
even days: 2nd, 4th, 6th, etc.)
1. With the
V
cursor on SUN press the i button once. ODD will
flash on the screen.
2. If even day watering is desired, press the k button once.
EVEN will flash on the screen. You can move back and forth
from ODD to EVEN by pressing the k button.
3. Once odd or even day watering is chosen, turn the dial back
to the RUN TIMES position to set watering days.
To Next Page
Loading...
Need help?
General
