Hunter Pro-C User Manual

21
Setting Station Run Times
1. Turn the dial to the RUN TIMES position.
2. The display will show the last program selected (A, B, or C)
the station number selected, and the run time for that
station will be flashing. You can switch to another program by
pressing the n button.
3. Use the j and k buttons to change the station run time
on the display. You may set station run times from 1 minute to
6 hours.
4. Press the i button to advance to the next station.
5. Repeat steps 2 and 3 for each station.

Hunter Pro-C Specifications

General

Start Times Per Program	4
Warranty	2 years
Cycle + Soak	Yes
Display	LCD
Housing Material	Plastic
Zones	6, 8, 12, 16 (depending on model)
Indoor/Outdoor	Indoor
Mounting	Wall-mount
Electrical Input	120V AC, 60Hz
Transformer Output	24V AC
Number of Stations	6, 8, 12, 16 (depending on model)
Wireless Capability	No