Hunter Pro-C User Manual

26
Using the Pro-C to Operate Outdoor Lighting (optional)
Connecting the FX Transformer
The Pro-C is capable of operating three separate lighting
transformers equipped with the PXSync interface box.
Connect wires from the first PXSync box to station output 1
(and the Common) on the Pro-C terminal. If using a second or
third transformer, the second will be wired to station 2 and the
third wil be wired to station 3.
NOTE
Manual cycles initiated at the controller or from a remote will
cancel any automatic program currently running. Once manual
cycle is complete, the controller will return to automatic mode,
and run the next scheduled program at its specified start time.
Common
Station Output
Transformer
Accessory Plug

Hunter Pro-C Specifications

General

Start Times Per Program	4
Warranty	2 years
Cycle + Soak	Yes
Display	LCD
Housing Material	Plastic
Zones	6, 8, 12, 16 (depending on model)
Indoor/Outdoor	Indoor
Mounting	Wall-mount
Electrical Input	120V AC, 60Hz
Transformer Output	24V AC
Number of Stations	6, 8, 12, 16 (depending on model)
Wireless Capability	No