Hunter Rain-Clik Owner's Manual

2
Table of Contents
3 Wireless Rain-Clik Features
3 Key Benets
4 Wireless Rain-Clik Components
4 Wireless Rain-Clik Sensor
5 Wireless Receiver
6 Mounting the Receiver
6 Wiring the Receiver to Hunter Controllers
7 Wiring the Receiver to Other Controllers: Normally
Closed Sensor Applications
7 Wiring the Receiver to Other Controllers: Normally
Open Sensor Applications
8 Surface Mounting
8 Gutter Mounting
9 Adjustments and Operation
9 Tips for Mounting the Sensor
9 Receiver Operation
10 Bypassing the Sensor
10 Setting the Transmitter Address at the Receiver
11 Battery Life
11 To Check the Status of the Battery in the Transmitter
11 System Will Not Turn On at All
11 System Will Not Shut O Even Aer Heavy Rainfall
11 Sensor Bypass LED Is Flashing Red
12 Replacement Parts and User-Installed Options
13 Notices
13 FCC Notice
14 Innovation, Science and Economic Development
Canada (ISED) Compliance Notice
14 CE
15 Notes
Need more helpful information on your product? Find tips
on installation, controller programming, and more.
https://hunter.info/rainclik

Hunter Rain-Clik Specifications

General

Type	Rain Sensor
Adjustable Rainfall Settings	Yes
Warranty	5 years
Compatibility	Compatible with most irrigation controllers
Mounting Options	Gutter
Wiring	Two-wire connection to controller (Wired)
Shut-off	Automatic shut-off when rainfall is detected
Adjustability	Adjustable sensitivity
Function	Prevents irrigation during or after rainfall
Sensitivity Adjustment	Yes