Hunter Soil-Clik - Connecting the Module to Hunter Controllers

12
Connecting the Module to Hunter Products
Overview
1. Gray Wires: Connection to Soil-Clik probe
2. Yellow Wires: Soil-Clik module power, requires 24 VAC
power (100 mA max)
3. White Wires: Module output, to Hunter controller
sensor input, or to interrupt 24 V common wiring to eld
Route all wires through low-voltage conduit hole in the
controller enclosure. Make all external connections with
waterproof connectors.
Do not connect the Soil-Clik to high-voltage
(120/230 VAC) wiring!
➌ ➋
➊