Hunter Soil-Clik - Programming and Operation

20
Programming
LED Screen Overview
Soil-Clik is used to set a desired moisture level. The level
may be changed with the + and - buttons.
When the desired moisture has been reached, Soil-Clik
will interrupt irrigation either through the controller’s
sensor input, or by “breaking” the common wire to
the eld.
LCD SCREEN
1
Alarm
2
Measurement
3
Moisture level
4
Moisture setting
5
Watering interrupted
6
Pause/override
➊
➏
➋
➎
➌ ➍