22
Conrmation of Information Sent
to the Controller...
Take the guesswork out of programming
interchange
“Did the program download or not?” Hunter
understands the frustrations of users of remote
controlled devices. The WVP indicates a
successful contact and download with the
WVC with two short audible beeps. If a
contact was not successful, the WVP will also
inform the user with one long sustained tone.
Waterproof Button Keypad...
Full overlay means rugged reliability
With a waterproof
overlay protecting the
faceplate buttons, this
unit can be carried
into the eld where it
will get wet. The WVP
transmitter is as easy to program as other user-
friendly Hunter controllers, like the Hunter
ICC, Pro-C or EC. There are a total of ve
intuitive programming buttons that are utilized
to provide a sophisticated program to any
WVC controller.
Battery Life Status Indicator...
Low battery warning
How much useful battery life
is left? For battery-powered
controllers produced in the
past, the answer has always
been, “I donʼt know.” With Hunterʼs battery-
powered WVP Programmer, you always know
the batteryʼs life, in both the WVC and the
WVP, because of a battery consumption icon
in the LCD display. Now you have the option
of replacing the battery only when it actually
needs replacing and not before, saving both
time and money.
Independent Station Programming...
Different watering requirements are
met with ease
The battery-powered WVP Programmer
allows for varied irrigation applications using
independent programming for each zone.
This means that each valve is set up with its
own start time, run time, and day schedule.
This important feature can be used for various
types of plants that have completely separate
watering requirements, such as turf or shrubs
and trees/shrubs on drip. Plus, each zone has
the ability to water up to nine start times per
day. The user has complete exibility with
watering schedules for new seed or sod lawns,
multiple cycles for low inltration-rate soils,
slopes, morning or evening irrigation and other
watering window restrictions.
Up to Nine Start Times Available...
Special watering requirements for new
landscapes or slopes are accounted for
You are in complete control when it comes
to programming irrigation starts in the WVP.
As with all Hunter controllers, setting the
start time is as simple as pushing the up or
down arrow buttons to the desired time. With
its nine available start times, the WVP offers
the exible watering schedules needed for
establishing new turf, irrigating steep slopes
that require multiple starts to prevent erosion.
One Touch Manual Start...
Simple operation for a quick watering
check of zones
A feature that Hunter
has incorporated into
the WVP Programmer
is called the One Touch
Manual Start. It increases
the user-friendliness of
the controller by using
fewer steps to activate the zone. This feature
is great when extra watering is needed but
you donʼt want to spend time putting in a new
program. When the time of day and battery
indicator are showing in the display, push the
right arrow button to activate the zone.
Squeeze the Transmit/Receive button on the
WVP and a signal will be sent to turn the
station on.
PRODUCT FEATURES AND BENEFITS (continued)
To Next Page
Loading...
