EasyManuals Logo

Hunter SVC-400 User Manual

Hunter SVC-400
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
®
4
5
PRODUCT FEATURES AND BENEFITS (continued)
User-Friendly Programming...
Same programming exibility and simplicity
as all Hunter irrigation controllers
By incorporating an electronic push-button
interface, the SVC allows complete custom
programming for irrigation start times, run
times and days of the week. Unlike
other battery-powered
controllers on the market,
users are not forced to
settle on factory preset
irrigation schedules that
may not meet the unique
irrigation requirements of
your site.
Electronic Keypad, with Rubber Buttons...
No loose dials or parts to lose
The Hunter SVC utilizes a hermetically-sealed
pushbutton keypad to program the controller,
so there are no removable parts to lose in the
valve box. By simply pushing the faceplate
buttons these units can be programmed to
operate valves with
the
same ease and
programming
exibility as the
versatile Hunter
Pro-C controller.
Three Options for Simple Valve or
Valve Box Installation...
Quick and efcient installation options save
time and money
Three different ways to mount the SVC
controller gives the installer options to keep
the controller up in the valve box out of the
mud. The three options are:
1. Mount to a Hunter Industries valve
solenoid using the clip bracket.
2. Mount on the side of the
valve box using sheet metal
screws and the wall/pipe
bracket.
3. Mount on a section of "
PVC pipe using the wall/
pipe bracket. This mounting
option can be very useful when the other
mounting options represent a tight t in the
valve box or when the valve is installed
deep in the ground.
Quick Convenient Combo Kit with a
1" PGV Valve...
Retrotting an additional zone has
never been easier
When addressing the need to add an additional
valve to the system during a retrot or just
installing a single valve for a drip zone, the
combination SVC controller/PGV Valve kit
(model SVC-100-Valve) makes for a quick and
hassle-free solution. The kit includes a 1" PGV
Valve with Flow Control with a DC latching
solenoid and an SVC
Controller as well as all
mounting brackets.
Figure 3
Unit can be mounted on " pipe for convenient access.
Mount to valve box wall.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hunter SVC-400 and is the answer not in the manual?

Hunter SVC-400 Specifications

General IconGeneral
BrandHunter
ModelSVC-400
CategoryController
LanguageEnglish

Related product manuals