Hunter TCX56 - Page 11

Operation Instructions for TCX56/57 Tire Charger
11
2. Overinated tires can explode, producing hazardous ying debris that may result in an
accident.
3. Tires and Rims that are not the same diameter are “mismatched.” never attempt to mount
or inate any tire and rim that are mismatched. For example, never mount a 16.5” tire
on a 16” rim and vice versa. This is very dangerous. A mismatched tire and rim could
explode, and resulting in an accident.
4. Never exceed the bead setting pressure (gauge on hose) provided by the tire
manufacturer, as stated on the sidewall of the tire.
5. Never place your head or any part of your body over a tire during ination process or
when attempting to seat beads. This machine is not intended to be a restraining device
for exploding tires, tubes or rims.
6. Always stand back from tire changer when inating, never lean over.
An exploding tire and rim may be propelled upward and outward with enough force
to cause serious injury or death.
Never mount any tire unless the tire size (molded into the sidewall) matches the rim
size (stamped into the rim) exactly or if the rim or tire are defective.
Never exceed tire pressure recommended by tire manufacturer.
This tire changer is not a safety device and will not restrain exploding tires and rims.
keep area clear of bystanders.
DANGER
7. Crushing Hazard. Moving Parts Present. Contact with moving parts could result in an
accident.
• Only one operator may work with the machine at a
time.
• Keep all bystanders clear of tire changer.
• Keep hands and ngers clear of rim edge during
demounting and mounting process.
• Keep hands and ngers clear of mount/demount
head during operation.
• Keep hands and other body parts away from
moving parts.
• Do not use tools other than those supplied with tire
changer.
• Use proper tire lubricate to prevent tire binding.
Avoid Personal Injury. Carefully read, understand and follow the warnings and
instructions given in this manual. This manual is an essential part of the product.
Keep it with the machine in a safe place for future reference.
WARNING