Operation Instructions for TCX56/57 Tire Charger
49
2.10 Clamping Jaw Extensions AR46N
The clamping jaw extension / reducers add 4 inches of exterior clamping OR reduce external
clamping by 6 inches.
JAW ADAPTORS IN REDUCER
CONFIGURATION ON 4” WHEEL
JAW ADAPTORS IN EXTENSION
CONFIGURATION ON 30” WHEEL
The jaw adaptors may be congured for either extension or reduction by removing the two
nuts and screws from the adaptor as shown below, rotating the adaptor plate 180°, and re-
securing.
ROTATE
ADAPTOR
PLATE
REMOVE NUTS
AND SCREWS
JAW ADAPTORS IN REDUCER
CONFIGURATION
JAW ADAPTORS IN EXTENSION
CONFIGURATION
To Next Page
Loading...
