Hunter TCX56 - 1.10 Wheel Rotation Pedal; 1.11 Tire Bead Breaker Shovel control

Operation Instructions for TCX56/57 Tire Charger
20
Throughout this manual, control pedals are referred to by the associated symbol.
The PowerOut system provides bead breaking controls on the handle for convenience,
particularly with larger diameter assemblies.
1.10 Wheel Rotation Pedal
Step down on the rotation pedal to rotate the wheel clockwise.
Release the pedal to stop rotation. Depressing the pedal halfway rotates
the wheel at slow speed. Depressing the pedal all the way rotates the
wheel at fast speed.
Lift up on the pedal to rotate the wheel counterclockwise. Release the
pedal to stop rotation.
1.11 Tire Bead Breaker Shovel control
Keep arms and legs from between the bead breaker arm and the side of the housing.
WARNING
4-402023
CRUSH HAZARD CRUSH HAZARD
EXPLOSION HAZARD
Press the “In” button to close bead breaker arm and loosen bead (red arrow).
Press the “Out” button to allow the bead breaker arm to open (black arrow).