Operation Instructions for TCX56/57 Tire Charger
42
Move the articulated arm of the BPS to the 3 o’clock position and lower the upper bead
press disc down onto the edge of the tire.
With the tire in position, press the wheel rotation pedal to rotate the wheel
clockwise and demount the bottom bead.
2.6 Mounting of difficult tires: low profile or Run-Flat tires
Mount the rst bead as usual.
Move the valve to about 5 o’clock.
Bring the BPS arm to the working position with the bead breaker disc in its limit stop position.
Rotate the BPT arm anti-clockwise and stop at h.2.
Tilt down the mobile part of the arm and secure with its pin. Rotate the BPT arm anti-
clockwise until its locking.
To Next Page
Loading...
