Operation Instructions for TCX56/57 Tire Charger
15
No. Part Number Description
1 RP11-4-402023 DECAL-RIM, TABLE, BEAD BREAKER, BEAD AIR PRESSURE
2 RP11-4-132526 DECAL-HUNTER LOGO
3 RP11-4-113623 DECAL-PEDAL OPERATION
4 RP11-4-402030 DECAL-INFLATION PEDAL OPERATION
5 RP11-3020842 DECAL-TABLE ROTATION
6 Rif. SN DECAL-MODEL SERIAL NUMBER
7 RP11-4-402027 DECAL-MAXIMUM INLET PRESSURE
8 RP11-4-402018 DECAL-HUNTER BEAD PRESS SYSTEM
9 RP11-3013640 DECAL-ARROWS UP-DOWN
10 RP11-4-402021 DECAL-MANUAL TIRE BLEED VALVE
11 RP11-4-402038 DECAL-VERTICAL COMUMN LOCK BUTTON OPERATION
12 RP11-4-115412 DECAL-DANGER-WARNING INDICATION
13 RP11-3016568 DECAL-BPS LOCK
14 RP11-4-115411 DECAL-DANGER OPERATION
15 RP11-4-407099 DECAL-TOOL MOVEMENT
16 RP11-4-115243 DECAL-WARNING OPERATION
17 RP11-4-113552 DECAL-TL TOOL LABEL
18 RP11-4-115246 DECAL-ELECTRICAL HAZARD
19 RP11-4-113016 DECAL-RECOMMENDED TPMS SENSOR START POSITION
20 Rif. SN DECAL-BPS SERIAL NUMBER (NOT SHOWN)
Electrical indications
The TCX56/57 is manufactured to operate at a specic voltage and amperage rating.
Make sure that the appropriate electrical supply circuit is of the same voltage and amperage
ratings as marked on the TCX56/57.
FIRE HAZARD. DO NOT ALTER THE ELECTRICAL PLUG.
WARNING
Plugging the electrical plug into an unsuitable supply circuit will damage the
equipment.
NOTICE
To Next Page
Loading...
