Operation Instructions for TCX56/57 Tire Charger
47
Connect ination hose to valve stem.
Pull up on the tire lightly to reduce the gap between upper bead and the rim.
Do not stand over tire during inflation.
WARNING
Step down completely on the air ination pedal (pedal on the left side of the base) to release
a high-pressure air blast through jets on the clamps to assist in seating the beads of the tire.
AIR-JET
FROM HERE
To increase the effectiveness of the inflation jets, always liberally lubricate beads
and raise the lower bead while activating inflation jets.
NOTICE
To Next Page
Loading...
