EasyManua.ls Logo

HunterDouglas PowerView - Cleaning Procedures

HunterDouglas PowerView
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CARE
26
Cleaning Procedures
Hunter Douglas roller shades are made from dust-resistant materials which repel dirt and
dust. The following options are available if your shade needs cleaning.
Dusting
Regular light dusting with a feather duster is all the cleaning needed in most
circumstances.
Vacuuming
Use a hand-held vacuum with low suction for more thorough dust removal.
Compressed Air/Hair Dryer (Cool Setting)
Use compressed air or a hair-dryer on a cool setting to blow dust and dirt off of shades.
Spot-Cleaning
CAUTION: Do not spot-clean Alustra
®
Woven Textures
®
fabrics, Fiji, and Fiji Dimout fabrics.
Prepare a solution of warm water and a mild detergent.
Dampen a clean cloth in the solution and wring it out.
Dab the spot with the dampened cloth until it is removed. Do not rub the fabric.
Allow the shade to dry in the completely lowered position.

Other manuals for HunterDouglas PowerView

Related product manuals