HunterDouglas PowerView User Manual

GETTING STARTED
5
Thank you for purchasing Hunter Douglas Roller and Screen Shades with PowerView
®
Automation. With proper installation, operation, and care, your new shades will provide years
of beauty and performance.
Please thoroughly review this instruction booklet and the enclosed packing list before
beginning the installation.
Tools and Fasteners Needed
■
Flat blade and Phillips screwdrivers
■
Level (laser level is recommended)
■
Measuring tape and pencil
■
Standard, Fascia and Coupled shades. Power drill,
1
∕
8
" drill bit and a
5
∕ 16 " hex driver.
In addition, you will need fasteners designed to work with your specific mounting surface(s).
Standard, Coupled, and Fascia Shades
■
#10 x 1
1
⁄ 2 " Phillips Hex Head Screws (Provided). Two 1
1
⁄ 2 " screws are provided per
installation bracket.
Pocket Shades
■
#10 Hex Head Screws (Not Provided). See “Pocket Installation” on page 15.

HunterDouglas PowerView Specifications

General

Power Source	Battery
Type	Remote Control
Technology	Radio Frequency (RF)
Battery Type	CR2032
Compatibility	Hunter Douglas motorized shades and blinds
Connectivity	RF
Buttons	Multiple
Dimensions	Varies by model
Weight	Varies by model