HunterDouglas Sonnette - Required Tools and Fasteners

2
GETTING STARTED
Thank you for purchasing Hunter Douglas Sonnette
®
Cellular Roller Shades with PowerView
®
Gen 3 Automation. With proper installation, operation, and care, your new shades will provide
years of beauty and performance.
Please thoroughly review this instruction booklet and the enclosed packing list before
beginning the installation.
Tools and Fasteners Needed
■
1
⁄ 4 " Hex, Flat blade, and Phillips screwdrivers
■
Level (laser level is recommended)
■
Measuring tape and pencil
■
Pliers
■
Power drill,
3
⁄ 32 " drill bit, and
1
⁄ 4 " hex driver
■
Scissors (heavy-duty)
In addition, you will need fasteners designed to work with your specific mounting surface(s).
■
#6 Hex Head Screws (Provided). Two 1
1
⁄ 2 " screws are provided per installation bracket.
■
Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws
long enough for a secure attachment.
■
Speed Nuts and Screws (Provided). Extension brackets come with screws and
speed nuts.
■
Rechargeable Battery Wand Spacer Block Kit (Provided with headrail-mounted
rechargeable battery wand option for inside and outside mounts). Spacer block kit
includes two #8 2
1
⁄ 2 " screws and two ½" spacer blocks (pictured) or two
1
⁄ 4 " spacer blocks.
■
Drywall Anchors (Not Provided). Use drywall anchors when mounting into drywall.
Speed Nut
and Screw
(Two Provided with
Each Extension Bracket)
#6 x 1
1
⁄ 2 "
Hex Head Screw
(Provided)
Longer #6 Hex Head Screw
for Use with Spacer Blocks
(Not Provided)
Rechargeable Battery W
and
Spacer Block Kit
(Provided with Rechargeable
Battery Wand)
1
∕ 2 "
1
∕ 2 "