Huntleigh Sonicaid Team 3 Series - FHR Monitoring; Toco;Iup; Spo; MHR; MECG

39
Operation
5.4.2 FHR Monitoring
Singleton Monitoring
In singleton monitoring, the FHR in
displayed in large digits in the top centre
region. Display shows FHR via wired
ultrasound transducer with audio.
Twins Monitoring
In twins monitoring, the FHR display
region is split to display the two separate
Fetal Heart rates, both using wired
ultrasound. Audio is enabled for channel
1 only.
Triplet Monitoring
In triplet monitoring, the FHR display
region is split to display the three
separate Fetal Heart rates. Display
shows triplets’ FHR, channels 1 ,2 and 3
from wired ultrasound. Audio is turned off
in this display example.
5.4.3 TOCO /IUP
TOCO
The TOCO region shows TOCO measurements in
progress.
Touch and hold on the TOCO region to Zero the
TOCO.
IUP *
The TOCO region shows IUP measurements in
progress.
Touch and hold on the TOCO region to Zero the IUP.
5.4.4 SpO
2
/ MHR / MECG
SpO
2
The SpO
2
region shows the probe plugged in and
measuring oxygenation.
MECG
The MECG region shows maternal heart rate.
* Intrapartum Model only