91
Maintenance
Allows the system
to be used in
demonstration mode.
Plays a previously
recorded CTG in a
continuous loop until
this dialogue used to
turn it off. Requires
the power to be
cycled off and on.
Click on one of the demo traces - this will enable demo mode. Switch unit off/
on to activate.
To disable demo mode, de-select the check box and switch unit off/on.
16.6 Customising Easinotes
The Secure Settings menus should be accessed by authorised
personnel only.
The Easinote sub-system is very fl exible allowing up to 12 groups of 12 notes to
be confi gured on Team 3.
Refer to Section 16.5 for details on how to change the Language and to access
the Settings Management feature.
Exporting Easinotes
1. With Team 3 switched on, plug a USB fl ash drive into one of the Team 3
USB sockets.
2. Set up Team 3 to operate in the language of your choice. This will ensure
that the Easinote fi le to be exported is saved with the other fi les for that
language. It is important to remember that each language has its own
Easinotes fi le so Easinotes will change with Language selection.
3. Enter the Settings Management screen.
4. Touch the
button to copy the current language Easinotes
to the USB Flash Drive.
5. Exit the menu and remove the USB fl ash drive.
To Next Page
Loading...