7
Safety
Do not use in the home environment.
Do not use the Team 3 in vehicles or in aircraft.
If this product is connected to another item of electrical equipment,
ensure that the system is fully compliant with IEC60601-1:2005.
This product contains sensitive electronics, therefore, strong radio
frequency fi elds could possibly interfere with it. This will be indicated
by unusual sounds from the loudspeaker. We recommend that the
source of interference is identifi ed and eliminated.
Do not expose to excessive heat, including prolonged exposure to
sunlight.
This equipment must not be modifi ed.
This equipment is for use only by suitably qualifi ed healthcare
practitioners.
When confi guring the system, consider and minimise the risk of
persons tripping over cables.
Do not use during magnetic resonance imaging (MRI) scanning.
Do not use if there is any damage to the unit or its accessories.
1.2 Infection Control
Single use transducer belts are for single patient use only and must not be re-
used.
For other single use accessories refer to the user instructions supplied with
them.
1.3 Patient Applied Parts
As defi ned in IEC60601-1:2005, the patient applied parts of the Team 3 Fetal
Monitor are the:
• TOCO Transducer • SpO
2
Sensor
• Ultrasound Transducer • MECG Electrodes
• Patient Event Marker • FECG Scalp Electrodes
• NIBP Cuff
To Next Page
Loading...