HUSABERG FE 450 User Manual

DISMOUNTING AND MOUNTING THE ENGINE
B
4
– Remove the nut from the swing arm pivot (1) and
knock out the swing arm pivot with a suitable pipe.
– Pull the swing arm towards the back and let it rest
against the frame.
– Unscrew the engine mounting plantes (2) and remove
the bolts.
NOTE: hold the engine to prevent it from tilting
out of the frame.
–Lift the engine and lift out of the frame towards the
left.
1
2

HUSABERG FE 450 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	449.3 cc
Bore x Stroke	95 mm x 63.4 mm
Compression Ratio	11.8:1
Starter	Electric starter
Transmission	6-speed
Lubrication	Pressure lubrication with 2 oil pumps
Cooling	Liquid cooling
Fuel System	Keihin EFI
Ignition	Digital CDI