EasyManuals Logo

HUSABERG FE 450 User Manual

HUSABERG FE 450
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
FUEL SYSTEM
G
5
CHECKING THE CHOKE SLIDE AND THE
HOT START KNOB
Choke slide:
The choke slide must be easily actuated.
The piston (1) on the choke slide may not have any deep
scores or deposits.
Hot start knob:
The hot start knob must be easily actuated.
The piston on the hot start knob may not have any deep
scores or deposits.
CHECKING THE ACCELERATOR PUMP
Check the diaphragm for crack formation or brittleness.
Check the gaskets for damage.
Check the holes (2) for free passage.
CHECKING THE JET NEEDLE
Check the jet needle for deformation and wear.
CHECKING THE FLOAT NEEDLE VALVE
Check the needle valve for indentations around the
sealing area.
Make sure no dirt has accumulated between the valve
seat and the float needle.
1
2
2

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HUSABERG FE 450 and is the answer not in the manual?

HUSABERG FE 450 Specifications

General IconGeneral
Engine TypeSingle cylinder, 4-stroke
Displacement449.3 cc
Bore x Stroke95 mm x 63.4 mm
Compression Ratio11.8:1
StarterElectric starter
Transmission6-speed
LubricationPressure lubrication with 2 oil pumps
CoolingLiquid cooling
Fuel SystemKeihin EFI
IgnitionDigital CDI

Related product manuals