HUSABERG FE 450 User Manual

TECHNICAL SPECIFICATIONS - CHASSIS
I
3
FC 450/4, 550/4 FE 450/501/550/650e/6
FS 450e/6, 650e/6
Frame tubular chrome-molybdenum-steel frame, powder-coated
Fork WP Up Side Down 4860 MXMA
Spring travel, front/rear 295/320 mm 260/287 mm
Rear suspension WP Progressive Damping System shock absorber, aluminum rear swinging fork
Front brake
Disk brake,perforated Ø 260 mm brake disk, floating brake caliper Ø 310 mm
Brake disk front minimum thickness 2,5 mm minimum thickness 5,0 mm
Rear brake Disk brake,perforated Ø 220 mm brake disk, floating brake caliper
Brake disk rear minimum thickness 3,5 mm
Front tire 80/100 - 21“ 90/90 - 21“ 120/60 - 17“
Air pressure, off road 1,0 bar 1,0 bar –
Air pressure, on road/alone – 1,5 bar 1,5 bar
Rear tire 110/100 - 19“ 140/80 - 18“ 150/60 - 17“
Air pressure, off road 1,0 bar 1,0 bar –
Air pressure, on road/alone
– 2,0 bar 2,0 bar
Fuel tank capacity 9 liters
Gear ratio - rear wheel 14:48 450/501 14:48,550 15:48,650 15:45 450 15:42, 650 15:40
Chain X-Ring 520
Available rear sprockets 38Z, 40Z, 42Z, 45Z, 48Z, 50Z, 52Z
Lighting Headlight HS1 12V 35/35W
Parking light 12V 5W (Socket W2, 1x9,5d)
Brake light 12V 21/5W (Sockel BaY15d)
Turn signal 12V 10W (Sockel Ba15s)
License plate illumination 12V 1,2W (Sockel 1x4,6d)
Battery maintenance-free battery 12V 7Ah
Steering head angle 63°
Wheel base 1490 ± 10 mm
Seat height, unloaded 930 mm 870 mm
Ground clearance, unloaded 380 mm 320 mm
FC 450/4, 550/4 FE 450/501/550/650e/6 FS 450e/6, 650e/6
WP 5018 PDS DCC WP 5018 PDS DCC WP 5018 PDS DCC
12.45.Y7.21 12.45.Y7.22 12.45.Y7.23
Compression damping 15 LS (low speed) 15 LS (low speed) 10 LS (low speed)
2 HS (high speed) 2 HS (high speed) 2 HS (high speed)
Rebound damping 22 22 15
Spring 76/95/260 71/90/260 84/250
Spring preload 6 mm 8 mm 5 mm
STANDARD SHOCK ABSORBER ADJUSTMENT
FC 450/4, 550/4 FE 450/501/550/650e/6 FS 450e/6, 650e/6
WP4860MXMA WP4860MXMA WP4860MXMA
14.45Y7.28 14.45Y7.29 14.45Y7.30
Compression damping 18 19 20
Rebound damping 19 21 15
Spring 4,4 N/mm 4,2 N/mm 4,4 N/mm
Spring preload 5 mm 5 mm 33 mm
Air chamber length 100 mm 110 mm 110 mm
Fork oil SAE 5 SAE 5 SAE 5
STANDARD FORK ADJUSTMENT

HUSABERG FE 450 Specifications

General

Engine Type	Single cylinder, 4-stroke
Displacement	449.3 cc
Bore x Stroke	95 mm x 63.4 mm
Compression Ratio	11.8:1
Starter	Electric starter
Transmission	6-speed
Lubrication	Pressure lubrication with 2 oil pumps
Cooling	Liquid cooling
Fuel System	Keihin EFI
Ignition	Digital CDI