EasyManuals Logo

HUSABERG FE 450 User Manual

HUSABERG FE 450
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
PREFACE
This manual contains detailed instructions on repairing the engine. It was prepared according
to the state of the art for this model series. We reserve the right to make modifications based
on technical progress without making the respective corrections in this repair manual.
This manual does not contain a description of general shop or working methods. It does not
include safety rules generally observed in workshops and is based on the assumption that the
work is performed by a mechanic who has completed his vocational training.
Please read the entire manual before starting to work.
WARNING: failing to observe these instructions can be dangerous to life and limb.
CAUTION: failing to observe these instructions may damage the motorcycle/engine components
or impair the motorcycle's traffic safety.
NOTE: provides useful information.
Only use ORIGINAL HUSABERG SPARE PARTS if parts need to be replaced.
The engine will only continue to operate safely if the prescribed service work is performed
regularly and professionally.
Subject to changes in construction and design.
C
by HUSABERG All rights reserved

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HUSABERG FE 450 and is the answer not in the manual?

HUSABERG FE 450 Specifications

General IconGeneral
Engine TypeSingle cylinder, 4-stroke
Displacement449.3 cc
Bore x Stroke95 mm x 63.4 mm
Compression Ratio11.8:1
StarterElectric starter
Transmission6-speed
LubricationPressure lubrication with 2 oil pumps
CoolingLiquid cooling
Fuel SystemKeihin EFI
IgnitionDigital CDI

Related product manuals