HUSABERG FE 550 Repair Manual

DISMOUNTING AND MOUNTING THE ENGINE
B
4
– Remove the nut from the swing arm pivot (1) and
knock out the swing arm pivot with a suitable pipe.
– Pull the swing arm towards the back and let it rest
against the frame.
– Unscrew the engine mounting plantes (2) and remove
the bolts.
NOTE: hold the engine to prevent it from tilting
out of the frame.
–Lift the engine and lift out of the frame towards the
left.
1
2

HUSABERG FE 550 Specifications

General

Displacement	549.1cc
Fuel system	Keihin FCR-MX 41
Cooling system	Liquid-cooled
Starter	Electric starter
Transmission	6 speed
Engine type	Single cylinder, 4-stroke