Husqvarna 2100 - Technical Specification; Engine Displacement; Cylinder Bore; Piston Stroke

nloo
TechnicalSpecification
n
Displacement
Bore
Stroke
Ignitionsystem
Ignitionadvance
Sparkplug
Electrodegap
Carburetor
Fueltankvolume
Oiltankvolume
Chainlubrication
Clutchdrum/sprocket
Weights
99 cm3 (6 cu in)
56.0 mm (2.20”)
40.0 mm (1.57”)
Electronic. Make SEM type GA 1.
24° before t.d.c. at 133 r/s (8,000 r/rein)
BoschWSR 8F
0.5 mm (0.020”)
Diaphragm carburetor. Make Tillotson type HS
136C with speedgovernor0.070”.
Basicsetting:
H = 1.0
L = 1.2
1.0 Iitre (0.26 US gallon, 0.22 Imp gallon).
Fuel mixture 4% (1 :25).
With HusqvarnaTwostroke Oil 2% (1:50).
0.65 Iitres (0.17 US gallon, 0.14 Imp gallon).
Two separatelubrication systems:
Automatic
No supply during idling. Adjustable for two different
delivery rates:
Bar 15“ 21”:
Position I
Bar 21” and more: Position II
Manual
Hand-operated pump on the left sideof the rear
handle.
Standard:
7 teeth, 0.404” Pitch.
Optional:
8 teeth, 3/8” Pitch.
1. Weight sawbody (empty)
8.0 kg (17.6 lb)
2. Weight sawbody (empty) incl. 24”
bar and chain (Oregon 52L - 76E 0.404 ’’).10.2 kg (22.5 lb)
3. Same as2 however with full tanks._
11.4 kg (25.1 lb)
1:1
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com