Husqvarna 2100 - Service Data; Crankcase Assembly Specs; Fuel Tank Pressure Test; Carburetor Pressure Test

ServiceData
!2
CrankcaseAssy
Vacuum: 0.04 MPa (0.4 kp/cm2, 5.7 psi)
Max. leakage:0.01 MPa/1 min (0.1 kp/cm2,
1.4 psi, per rein)
TooIs: 5025037-01 Vacuum gauge
5025081-01 Cover plate, exhaust port
5025047-01 Cover plate, inlet port
Fig 2:1
Pressure:0.08 MPa (0.8 kp/cm2, 11.4 psi)
Max. leakage: 0.02 MPa/30 sec(0.2 kp/cm2,
2.8 psi, per 30 see)
Tools: 5025038-01 Pressuregauge
5025081-01 Cover plate, exhaust port
5025047-01 Cover plate, inlet port
Fig 2:2
Fueltank
Pressure:0.05 MPa (0.5 kp/cm2, 7.1 psi)
Leakage: No leakagepermitted.
Tool: 5025038-01 Pressuregauge
Carburetor
Pressure:0.03 MPa (0.3 kp/cm2, 4.3 psi)
Leakage:No leakagepermitted
Tool: 5025038-01 Pressuregauge
Fig 2:3
2:1
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com