SafetyEquipment
00
Fig 11:9
The safety catch is removed by pushingout the roll
pin with a drift 03 mm.
The spring isattached to the safety catch. It may
be changedafter pushingout the roll pin with a
drift @ 1.5 mm.
Reassemblyof the throttle safety catch and the
throttle lever is made in reverseorder to dis-
mantling.
Check that the throttle leverworks properly both
assafety catch and asstarting throttle ratchet.
11:3
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
To Previous Page
Loading...
