English - 33
Repair Instructions
7.15 Assembling the intake system
1
Fit the inlet pipe assy, B. See gure 25.
2
Fit the intake ange, C. See gure 25.
3
Fit the carburettor and the throttle rod as outlined
in “Assembling the carburettor”.
4
Fit the air lter, the lter holder, the cable from the
intake ange holder.
5
Fit the cylinder cover.
Fig 25
Three bond
#1322
NOTE!
It is very important that the intake system is
sealed. Otherwise the engine may seize up.
To Next Page
Loading...
