English - 45
Repair Instructions
7.18 Vibration damping system
Dismantling
Remove the plastic lids and rubber dampers on
both sides. See gures 48-49.
Cleaning and inspection
• Clean and inspect all parts carefully. If there
are any cracks or other defects, replace the
damaged parts with new ones. Always use
original parts.
Assembly
Fit the rubber dampers and plastic lids on both
sides. See gures 48-49. Tightening torque
2,5 - 3,9 Nm
Fig 48
Fig 49
To Next Page
Loading...
