13. Remove the mandrel.
14. Remove the rear unit.
15. Install in opposite sequence.
Note: Align the rear unit with the key in the hole.
5.4.2 To remove and install the rear top cover
Note: If the rear unit is removed, do step 3 and 4.
1. Turn the rear unit.
2. Put a cloth between the rear top cover and the link
arm to protect the rear top cover.
3. Lift the rear top cover slightly upwards to release it
from the magnets that hold the rear top cover.
26 - Repair instructions 1061 - 001 -
To Next Page
Loading...
