For more information about the operating modes
Start,
Park
and
Pause
, see
Operation on page 40
.
3.12.2 Map
The map shows the current position of the robotic
lawnmower and the set centerpoint (origin) for
GeoFence.
3.12.2.1 Map settings
1. Open
Map
in the main menu.
2. Tap the settings symbol down to the right.
3. Enable/disable
Movement path
.
4. Enable/disable
GeoFence radius
.
5. Choose
Map view
or
Satellite view
.
3.13 Settings - overview
For many working areas there is no need to change the
default settings. However sometimes, depending on the
lawn complexity, the mowing result can be improved by
making manual settings. For an overview of possible
settings, see
Overview of the settings structure (1) on
page 33
,
Overview of the settings structure (2) on page
34
and
Overview of the settings structure (3) (Bluetooth
short-range connectivity only) on page 35
.
Timer
The timer function is an ideal tool to
control which periods the robotic
lawnmower should not mow, for example
when children are playing in the garden.
See
Timer on page 24
Cutting height
The cutting height can be varied from MIN
(2 cm / 0.8 in.) to MAX (6 cm / 2.5 in.).
During the first week after a new
installation, the cutting height must be set
to MAX to avoid damaging the loop wire.
After this, the cutting height can be
lowered one step every week until the
desired cutting height has been reached.
See
Cutting height on page 26
.
Operation
This menu function is used to customize
the settings for
Weather timer, ECO mode
and
Spiral cutting
. See
Operation on page
26
.
Installation
This menu function is used to customize
the installation. For many working areas
there is no need to alter the default
settings, but depending on the lawn
complexity, the mowing result can be
improved by making manual settings. See
Installation on page 27
.
Accessories
This menu handles the settings for robotic
lawnmower accessories, for examples
Automower
®
Connect. Contact your local
Husqvarna representative for information
on what accessories are available for your
robotic lawnmower. See
Accessories on
page 30
.
General (only available for Bluetooth
short-range connectivity)
This selection allows you to make
changes to the general robotic lawnmower
settings, such as date and time. You can
also reset the robotic lawnmower to the
default settings. See
General on page
30
.
Security (only available for Bluetooth
short-range connectivity)
In this menu, settings relating to security
and the connection between the robotic
lawnmower and the charging station can
be made. See
Security on page 30
.
Automower
®
Connect (only available for
Bluetooth short-range connectivity)
This enables/disables the Automower
®
Connect module on the robotic
lawnmower.
3.14 Timer
To Next Page
Loading...
Need help?
General
